Rig resetting.
Yes mine does this also with experimental antennas.
I think your rightits too much RF on the outer conductor of the coax
feed or RF in the shack.
N1BBR
--
bw...@fastmail.net
__
Elecraft mailing list
Home: http://mail
On Nov 17, 2009, at 11:56 AM, John Huffman wrote:
> Symptoms - Worked a station at 14.022 at 10 watts. All is well. Tune
> up or down the band. Raise power over 30w. After a few letters on CW,
> the K2 mutes, the display flashes and I'm back on 14.022.
>
> Attempted to tune the external ma
John,
The resettable fuse in the base K2 is tripping - it trips at 5 amps, so
your base K2 is drawing too much current for some reason or another.
The reason for high current along with low output power is typically a
problem with the Low Pass filter or T4. But there are two LPFs involved
here
I'm trying to fix a friend's K2/100. I realigned it, CAL PLL, CAL Filters.
It seems to work fine on QRP. But, when I strange things happen when I
go to about 30 watts and above.
Symptoms - Worked a station at 14.022 at 10 watts. All is well. Tune
up or down the band. Raise power over 30w.
4 matches
Mail list logo