Re: [Elecraft] [K2] Question about tuning K2 for SSB..

You can adjust the ssb filter by listening to your own voice on the rig and adjusting the ssb filter to what sounds best to you. To monitor your own voice set the SSBA option to "BAL". Then got to CAL FIL for the filter you want to adjust and adjust it (a little at a time) while talking into

Re: [Elecraft] [K2] Question about tuning K2 for SSB..

John, A 20 Hz mis-tuning of a SSB signal usually will not be noticed, 50 Hz maybe, and 100 Hz definitely. So yes, you would normally tune the station until it 'sounds right' and then transmit. That assumes that you are using the same filter for transmit and receive. You can make some trial

[Elecraft] [K2] Question about tuning K2 for SSB..

Hi All, I'm learning to drive my new K2/100 and have reached a conceptual block that will betray a fundamental lack of understanding, but here goes anyway... My K2 dial frequency reads about 20hz under the actual frequency - receiving WWV on 1.00, the LCD frequency readout reads .98. Th