Dear OMs and Yls,
One of my K3 fans makes more noise than I care for whilst running just
65 Watts in CW mode. I wonder if there is an easy fix for the existing
fan. Maybe the only fix is a fan replacement?Secondly how problematic
is it to remove the fans? Does one need to rip out man
Doug,
It is not really a problem to remove the fan.
Take the top cover off, remove the 4 screws holding the fan panel,
unplug the fans (noting which connector goes where), and you may want to
remove the leads to the circuit breaker.
Except for putting a new fan on the fan panel, that is all t
Hi Doug,
If noise is the issue you might want to search the archives. Some
time back a fellow posted information on a replacement Noctua fan that had more
CFM output but was quieter than the original per the specs.
So if replacement is required then possibly the rep
Hi Bob,
it sounds really interresting. I realized that my K3 after huge upgrade and
now is really fully loaded is quite hot even in idle (RX mode). The PA/FP
temp is stabilized to 38-40C in RX idle when the FAN1 speed is selected but
when I touching the cabinet sides it is quite hot. So the more C
4 matches
Mail list logo
