Yes, I've had the same problem, after I tune , I get low power out indicated
Gordan,
e72x,
I updated the firmware to 3.04 last night. Today, after I tune, I get no or low
power out indicated on the RF meter in SSB. Keying down momentarily restores
power in SSB.
Are others experiencing
Hi,
I also have this problem that SSB power is low following the use of "TUNE". I
don't have the built in tuner. I use the tune ("hold") function to generate 10W
CW for my external remote auto-tuner. In the contest I got into the habit of
doing a power cycle after tuning (I now see that there
Here ya go Wayne.
Config TUN PWR nor
Config PWR SET per band
Band and Mode all bands phone usb and lsb
and front panel PWR control. 120w
I can't seem to change to cw mode and have it correct the low power out after
tune. I have cw wght set to ssb+cw btw. I actually turn the
There are two menu entrys that effect power in addition to the front
panel PWR control. There may be interaction between these in certain
combinations of settings or BAND and MODE.
Wayne has limited internet access this weekend and has asked me to
request information from those who are experienc
Llye,
FWIW, I am experiencing the same issue running QRP with the KAT3, when it is in
use, in 3.03
It does not seem to happen when the KAT3 is bypassed. Engaging the main TUNE
button (not the KAT tune), seems to put it back to normal.
Now if I can figure out why my "two" sounds like "zero" *si
During the WPX SSB contest I have noticed the same low output that others have
noticed after ATU TUNE. I just wanted to add one comment.
After low output is remedied with TUNE, the firmware seems to remember that
fact. That is, when I return to that vicinity after S&P QSOs elsewhere (ATU
fl
PM
Subject: Re: [Elecraft] [K3] K3 3.04 Power Output After Tune
Same here.
Augie Hansen escribió:
> Jim - W6VAR wrote:
>> I updated the firmware to 3.04 last night. Today, after I tune, I get no
>> or low power out indicated on the RF meter in SSB. Keying down
>> momentarily r
: Saturday, March 28, 2009 11:22 AM
Subject: Re: [Elecraft] [K3] K3 3.04 Power Output After Tune
I'm having a problem of low power output on SSB on 40 meters. Call for 100
watts, get 50 or less peak on LP-100 watt meter.
Reinstalled FW 3.04, calibrated K3 watt meter, calibrated TX GAIN using
Same here.
Augie Hansen escribió:
> Jim - W6VAR wrote:
>> I updated the firmware to 3.04 last night. Today, after I tune, I get no or
>> low power out indicated on the RF meter in SSB. Keying down momentarily
>> restores power in SSB.
>>
>> Are others experiencing this?
>
> Yes, I've had the s
though
it says 120w brings the power back up. It's then OK until I tap tune again!
Randy
K8RDD
- Original Message -
From: "Nick Lekic"
To: "Bill Coleman"
Cc: "K3support" ;
Sent: Saturday, March 28, 2009 10:19 AM
Subject: Re: [Elecraft] [K3] K3 3.
craft] [K3] K3 3.04 Power Output After Tune
I updated the firmware to 3.04 last night. Today, after I tune, I get no or
low power out indicated on the RF meter in SSB. Keying down momentarily
restores power in SSB.
Are others experiencing this?
Jim
W6VAR K3 1644
--
View this message in context:
Same problem here Bill
Low power output (40watts - 60watts) after using the tuner. CW produces
full output.
73, Nick
ve3ey
On 3/28/2009 10:03 AM, Bill Coleman wrote:
> Augie Hansen wrote:
>
>> Dave G4AON wrote:
>>
>>
>>> I assume by "after I tune" you mean pressing the XMIT/TUNE bu
Thank you for the observations on SSB Power Control before and after
KAT3 tuning or when in bypass. We'll be looking more closely at this
next week.
73,
Lyle KK7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinf
Augie Hansen wrote:
> Dave G4AON wrote:
>
>> I assume by "after I tune" you mean pressing the XMIT/TUNE button to
>> create a CW carrier at some level between 20 Watts and 100 Watts. I've
>> tried various combinations of power and both the actual measured output
>> and the indicated output on th
Sorry guys, you are correct. There is a problem with the ATU function on
SSB in ver 3.04. After tuning with the ATU in circuit, the power is much
lower on SSB until the TUNE button outputs a full carrier. The ATU isn't
normally used here these days as my antennas are resonant.
73 Dave, G4AON
K3/10
I updated the firmware to 3.04 last night. Today, after I tune, I get no or low
power out indicated on the RF meter in SSB. Keying down momentarily restores
power in SSB.
Are others experiencing this?
Jim
W6VAR K3 1644
S/N 1749 with 3.04. There is definitely something strange with the pow
Dave G4AON wrote:
> I assume by "after I tune" you mean pressing the XMIT/TUNE button to
> create a CW carrier at some level between 20 Watts and 100 Watts. I've
> tried various combinations of power and both the actual measured output
> and the indicated output on the K3 are both fine. No problem
I DG6HD have this problem since more ser 3.03 I go on 80m without tunen it go
with 120w raus swr 1:1,1 I tune and he goes only for each to volume with 30-80w
raus then must I him highly whistle or briefly xmit press and the k3 fully
drive out then has he the full achievement up to the next to tu
I assume by "after I tune" you mean pressing the XMIT/TUNE button to
create a CW carrier at some level between 20 Watts and 100 Watts. I've
tried various combinations of power and both the actual measured output
and the indicated output on the K3 are both fine. No problem here at all.
73 Dave, G4A
I've been running v3.04 during the CQ WPX contest (7 hours of heavy use
so far) and have had no problems with it at all.
73,
Dave AB7E
Augie Hansen wrote:
> Jim - W6VAR wrote:
>
>> I updated the firmware to 3.04 last night. Today, after I tune, I get no or
>> low power out indicated on
Jim - W6VAR wrote:
> I updated the firmware to 3.04 last night. Today, after I tune, I get no or
> low power out indicated on the RF meter in SSB. Keying down momentarily
> restores power in SSB.
>
> Are others experiencing this?
Yes, I've had the same problem, especially when operating split o
I updated the firmware to 3.04 last night. Today, after I tune, I get no or low
power out indicated on the RF meter in SSB. Keying down momentarily restores
power in SSB.
Are others experiencing this?
Jim
W6VAR K3 1644
--
View this message in context:
http://n2.nabble.com/K3-3.04-Power-Outp
I updated the firmware to 3.04 last night. Today, after I tune, I get no or low
power out indicated on the RF meter in SSB. Keying down momentarily restores
power in SSB.
Are others experiencing this?
Jim
W6VAR K3 1644
--
View this message in context:
http://n2.nabble.com/K3-3.04-Power-Outp
23 matches
Mail list logo
