I'm having a heck of a time fine tuning my output for digital modes. I have
my sound card set at 50% volume. A mic gain of 10 gives me "3 flicker 5". A
mic gain of 11 gives me "solid 5". Conversely if I keep the mic gain at 10
and change the sound card volume, same symptoms. Any suggestions on fine
Don,
Are you using DATA A mode (AFSK A for RTTY)?
You may have difficulty like that if you are running in SSB mode with
even a little compression enabled.
DATA Modes automatically turn off compression and TX EQ.
Is your soundcard line out cabled to the K3 Line IN jack? If you have
it plugged
Some folks use a 7 to 10 dB pi attenuator inline.
73,
matt W6NIA
On 12/17/2016 12:07 PM, Don Putnick wrote:
I'm having a heck of a time fine tuning my output for digital modes. I have
my sound card set at 50% volume. A mic gain of 10 gives me "3 flicker 5". A
mic gain of 11 gives me "solid 5"
Reduce computer sound output and get finer control with K3 Lin IN control knob.
Sent from my iPhone
...nr4c. bill
> On Dec 17, 2016, at 3:07 PM, Don Putnick wrote:
>
> I'm having a heck of a time fine tuning my output for digital modes. I have
> my sound card set at 50% volume. A mic gain of
4 matches
Mail list logo