Eugene,
An external reference for the K2 would achieve nothing dynamically.
The K2 stores its frequency information in EEPROM and retrieves that
info during operation.
The only time an accurate frequency reference would be a benefit to the
K2 is during the dial calibration steps of adjusting
26 PM
Subject: Re: [Elecraft] [K3] KREF3 External Reference Option
Perhaps there can be option to tell the MCU what frequency reference is used
to accommodate users with 5MHz or 1MHz references, not only 10MHz. I assume
there will be possibility to calibrate the internal oscillator to the good
refe
Perhaps there can be option to tell the MCU what frequency reference is used
to accommodate users with 5MHz or 1MHz references, not only 10MHz. I assume
there will be possibility to calibrate the internal oscillator to the good
reference and then disconnect the reference till next time (say once a
All,
Any chance of an external reference input for the K2?
73
K1NR
k2 6xxx
-
Web mail provided by NuNet, Inc. The Premier National provider.
http://www.nni.com/
__
El
Great news, I have been waiting for this option ever since my K3 arrived.
The method implies the phase noise of the 10MHz reference is not so
important - which is useful to know.
My high spec reference is 5MHz and my cheap one 10MHz. The 10MHz will have
worse phase noise than the TCXO in the K3
Prototypes are working perfectly. We're getting ready for field testing.
Wayne
N6KR
http://www.elecraft.com
On Dec 22, 2010, at 4:41 PM, tsmith...@cix.co.uk (Trevor Smithers) wrote:
> Any news on the External Reference Option ?
>
> 73
> Trevor G0KTN
>
> Original Message from
Any news on the External Reference Option ?
73
Trevor G0KTN
Original Message from Wayne N6KR dated 14 June 2010
There appears to be more demand for this than we thought, so we're
looking into it again.
Note that our planned external reference implementation would not
req
7 matches
Mail list logo