It never cease to amaze me how you learn something new about our radios
everyday. I always used a sound card previously and always thought split was
disabled in data a!
Tom
On Nov 12, 2014 9:30 PM, Jim Brown j...@audiosystemsgroup.com wrote:
John said:
Elecraft K3 remembers the MODE per
Is there a technical reason why split isn't available in DATA-A?
It would be nice to use since DATA-A nukes all the equalization stuff and
would allow WSJT to do split as needed.
jim ab3cv
__
Elecraft mailing list
Home:
On Thu, Nov 13, 2014 at 1:45 AM, Jim Miller j...@jtmiller.com wrote:
Is there a technical reason why split isn't available in DATA-A?
It would be nice to use since DATA-A nukes all the equalization stuff and
would allow WSJT to do split as needed.
... about setting Transceiver to
Thanks!!!
73
jim
ab3cv
On Wed, Nov 12, 2014 at 8:50 PM, John Nogatch jnoga...@gmail.com wrote:
On Thu, Nov 13, 2014 at 1:45 AM, Jim Miller j...@jtmiller.com wrote:
Is there a technical reason why split isn't available in DATA-A?
It would be nice to use since DATA-A nukes all the
Jim,
Since most soundcard data applications will allow the TX frequency and
the RX frequency to be different on the waterfall, there is usually no
need to put the K3 into split mode unless the offset is greater than the
2.7 kHz bandpass. Check your WJST software to see if it can lock the TX
John said:
Elecraft K3 remembers the MODE per VFO; when it says SPLIT N/A, it
is because VFO A is in MODE=DATA, but VFO B is in some other MODE. To
fix it: switch VFO_A/B, change MODE to DATA, switch VFO_A/B, then hold
SPLIT.
A much easier way to do it is hit A-B twice in succession, which
6 matches
Mail list logo
