I think Don should write that up and post it on his site.
On 7/24/2016 8:37 PM, Don Wilhelm wrote:
Mark,
I think you are correct, no "standard" test procedure is possible
because it would not account for all installed options, filter
assignments, and other configurable aspects of the K3/K3S.
Mark,
I think you are correct, no "standard" test procedure is possible
because it would not account for all installed options, filter
assignments, and other configurable aspects of the K3/K3S.
I would however suggest that one could use a procedure similar to what I
use for a K2.
It is best
and used to detect when system degradation has
occurred.
Jer
-Original Message-
From: Mark E. Musick [mailto:markmus...@sbcglobal.net]
Sent: Sunday, July 24, 2016 7:38 PM
To: 'Jerry'; 'Clay Autery'
Cc: elecraft@mailman.qth.net
Subject: RE: [Elecraft] [K3S] Test Procedure
Y
Plus running the risk that the
user(s) could mess up the works.
Mark Musick, WB9CIF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jerry
Sent: Sunday, July 24, 2016 10:10 PM
To: Clay Autery
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3S]
Not yet received to date
Sent from my iPad
> On Jul 24, 2016, at 4:16 PM, Clay Autery wrote:
>
> Glad that's all that was toasted, Jerry!
>
> Did I miss where the "complete test procedure" was posted? That's a
> diag tree I'd like ot have.
>
> 73,
>
> __
> Clay Autery, K
Glad that's all that was toasted, Jerry!
Did I miss where the "complete test procedure" was posted? That's a
diag tree I'd like ot have.
73,
__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389
On 7/24/2016 2:39 PM, Jerry Moore wrote:
> Further testing has proven to be in
Further testing has proven to be interesting.
Final assessment.
1 USB hub damaged
All other gear is fully functional. It's more likely that the hub failed at
an earlier date and was only discovered on me testing post storm. This is
the most logical as everything has been disconnected for weeks du
Does anyone have a full functional test procedure to verify my K3S is fully
operational?
I had a local lightning strike came in through ground that apparently
damaged a USB hub, Raspberry PI, Keyboard, Mouse... I suspect the K3s may be
damaged as well (especially the USB).
I'm looking for a full
8 matches
Mail list logo