Hi Jim,
I'm using 1.09 but I believe this will also apply to 1.08. If VFO A is on
the left side of the screen then you must be in Fixed-Tune mode. In that
mode, the left frequency display shows the lower frequency limit. The right
display shows the upper frequency limit. The center display shows
Understood! Thanks, Mike.
I could and should use that mode for split-frequency pileups, and I tried on
a foreign mode, PSK.
Jim N7US
-Original Message-
Hi Jim,
I'm using 1.09 but I believe this will also apply to 1.08. If VFO A is on
the left side of the screen then you must be in
I was experimenting with moving the VFO A frequency to the left side of the
display for PSK (a mode I don't normally use) and think I found a bug.
I set the span to 4 kHz, and the left side of the display shows the correct
VFO A frequency, 14070.0, and the right side correctly shows 14074.0, but
Hi Jim,
I set my P3 Span at 4KHz and set the rig frequency at 14.070 and I get different
results:
Left : 14.068.00
Center: 14.070.00
Right : 14.072.00
What am I missing in your post?
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 3 Jul 2011 20:43:34
4 matches
Mail list logo