Before call service has anyone seen this error?
FATAL ERROR
In: ddc_set_coef()
span=0
Press any active key to escape
I don not have the SVGA adapter installed. Have the latest firmware.
Pressing any active key does not clear(or escape).
Should I try a parameter initialization?
73, Joh
OK, I just spent 2 hours as W1AW/4 on 40 cw and everything was working
fine. I changed bands and the P3 displayed:
FATAL ERROR
In: ddc_set_coef()
span=0
Press any active key to escape
But all keys are dead, so no escape from the black screen of death. Power
down/up does no change the mes
Hi All,
My recently purchased P3 (it also has a P3SVGA fitted) has let me down this
weekend.
I purchased a P3 and P3SVGA recently for use with my K3. It has been working
correctly for some time until today.
Today the display froze and no button presses responded. I cycled the power
supply to the
Thanks for that information. A Parameter Initialization (as described on page
28 of the current P3 manual) was the solution. My firmware version was 1.13 and
I have now upgraded to 1.16. Now that I have performed the upgrade this problem
should not re-occur.
Thanks to all those who took the tim
I searched the archives and found the answer. Apparently this is not cured in
the latest firmware?
John N1JM
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Fatal-Error-tp7562499p7562500.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Do Parameter Initialization > as described on page 28 of the current P3
manual.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Fatal-Error-tp7562499p7562501.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Yes, it's cured in the latest firmware but certain older firmware
versions could corrupt the EEPROM data when upgrading from certain even
older versions. The bad data is still there even when you upgrade to
the latest version. Doing a Parameter Initialization fixes it.
Alan N1AL
On Tue, 2012-0
Try doing the Parameter Initialization (see Troubleshooting section of
P3 Owner's Manual.) Basically you hold the LABELS key while turning on
the power with the POWER key.
Alan N1AL
On 04/10/2014 07:27 AM, George Dubovsky wrote:
OK, I just spent 2 hours as W1AW/4 on 40 cw and everything was
Parameter Initialization fixed it! Thank you, Alan.
73,
geo - n4ua
On Thu, Apr 10, 2014 at 11:50 AM, Alan Bloom wrote:
> Try doing the Parameter Initialization (see Troubleshooting section of P3
> Owner's Manual.) Basically you hold the LABELS key while turning on the
> power with the POWER
On Sun, 2012-06-03 at 19:44 +0100, Allan G Duncan wrote:
> Today the display froze and no button presses responded. I cycled the power
> supply to the P3 and it now displays:-
>
> FATAL ERROR
> In: ddc_set_coef()
> Span=0
> Press any active key to escape
That is caused by a bug in vers
10 matches
Mail list logo
