I'm trying to setup a set a Radio Sport headset, with the M350 Electret
microphone. The mic is connected to the K3 rear panel mic jack. The
Arlan instructions recommend using "Option 7" for +10 DB of additional
Mic Pre-amp gain for close-talk mics.
How do you set "Option 7"? What menu is it in
tap MENU to get into MAIN
locate MIC SEL
tap DISP
read the info that scrolls across VFO B
it will tell you about toggling Boost
by taping Number 1 on the number pad
On 3/12/2014 8:40 PM, John wrote:
I'm trying to setup a set a Radio Sport headset, with the M350 Electret
microphone. The mic is c
And tap 7 for an additional 10db of gain!
I'm sure " Its in the book!"
...bill nr4c
Sent from my Verizon Wireless 4G LTE DROID
Sam Morgan wrote:
>tap MENU to get into MAIN
>locate MIC SEL
>tap DISP
>read the info that scrolls across VFO B
>it will tell you about toggling Boost
>by taping Num
Page 20 K3 Owner's man D10.pdf
MIC
MONO; hi- or low-Z
This jack accommodates an electret or dynamic
mic. Use MAIN:MIC SEL to select the rear panel
mic (RP). Tap 1 to turn on Low or High mic gain
range. Tap 2 to turn bias on/off (see pg. 28 for
recommendations based on mic type).
For the front-pan
Yes the ref to 3 is a long overdue edit. I have used 7 to work with my Heil
HM12 in front panel. Was unaware it doesn't work for rear jack. CM500 plugged
in there, no need.
...bc
Sent from my Verizon Wireless 4G LTE DROID
Sam Morgan wrote:
>Page 20 K3 Owner's man D10.pdf
>
>MIC
>MONO; hi-
5 matches
Mail list logo