I’m using VE3NEA’s Faros NCDXF beacon software to monitor the 5 bands using
my K3S on bypass with a KAT500 on bypass, as my two antennas have rATUs at
the bases. When I set the KAT500 to ANT2 it keeps switching back to ANT1 so
I figure it must be remembering a prior band/ANT setting. How do I make
You can easily assign antenna ports using the KAT500 utility and a 3.5mm
to USB cable.
John KK9A
Bret N4SRN wrote:
I’m using VE3NEA’s Faros NCDXF beacon software to monitor the 5 bands using
my K3S on bypass with a KAT500 on bypass, as my two antennas have rATUs at
the bases. When I set the KAT5
How many of the beacons are running now? I stopped using FAROS because
the beacons started going away...
I have a loop under test right now using WSPR, and my K3, at 2 watts...
It will be up for the next 24 hours.
73s and thanks,
Dave
NK7Z
https://www.nk7z.net
On 05/06/2018 06:21 PM, Mave
https://www.ncdxf.org/pages/beacons.html
All 18 seem to be going, but not strong with poor conditions.
BRET/N4SRN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listin
Thanks Bret!
73s and thanks,
Dave
NK7Z
https://www.nk7z.net
On 05/07/2018 02:38 AM, MaverickNH wrote:
https://www.ncdxf.org/pages/beacons.html
All 18 seem to be going, but not strong with poor conditions.
BRET/N4SRN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
5 matches
Mail list logo