On 7/24/2018 5:12 AM, j...@kk9a.com wrote:
A couple things not mentioned below is that the Flex amp is
SO2R capable and has a higher list price.
Is it being shipped?
73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/
My experiences are similar to those by Igor.
I use K3 with SPE 2k. Very convenient with 6 antenna connectors with 3
antennas per band. Turns on and off with K3 and follows bands. Antenna
switch and ATU are active with teh amp off. But 2k is heavy and the PS
generates some spurs.
I used KX3 with
. In my mind, the ‘perfect remote setup’ would
be a blending of the two systems… ;-)
FWIW,
Barry, WD4ASW
Keller, TX
(Currently in Columbia, SC)
>
> -larry (K8UT)
>
> -- Original Message --
> From: "j...@kk9a.com"
> To: elecraft@mailman.qth.net
)
-- Original Message --
From: "j...@kk9a.com"
To: elecraft@mailman.qth.net
Sent: 2018-07-24 08:12:53
Subject: [Elecraft] Amp comparisons
K7ERQ left EHAM reviews on both, it would be nice if he wrote a
comparison. A couple things not mentioned below is that the Flex amp
is
SO2R capable
K7ERQ left EHAM reviews on both, it would be nice if he wrote a
comparison. A couple things not mentioned below is that the Flex amp is
SO2R capable and has a higher list price.
John KK9A
K9MA wrote:
On 7/23/2018 21:37, Gary K9GS wrote:
> Any side by side with the KPA1500 and the Flex Power G
I have used SPE 1K with my K3 for almost 8 years. I am now using SPE
1.3 with both K3 and KX3 connected for SO2R. No issues with integration
at all (just coax and 3 wire control cable), cheaper then Elecraft,
weight is under 10 Kg even with antenna tuner built in, SO2R with just 1
amp, 4 ante
On 7/23/2018 6:36 PM, Clay Autery wrote:
BOTTOM LINE: My next amp purchase would/will be a KPA-1500.
Mine too. Normally, there are three amps on my desk -- two 87As for high
power, SO2R contesting, and a KPA500 for 6M and instant on). For about
two weeks, I've been running a borrowed KPA1500
On 7/23/2018 21:37, Gary K9GS wrote:
Any side by side with the KPA1500 and the Flex Power Genius yet?
I haven't seen any yet. I did have a conversation last year with 4O3A,
designer of the Power Genius. From what Ranko said, the Flex amp seemed
to have more headroom than the KPA1500, which mig
ard Thorne
Sent: Monday, July 23, 2018 9:51 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Amp comparisons
Rick,
I have a KPA-1500 and a KPA-500. To be honest, with my decent antenna system,
500 watts is plenty, most of the time. I purchased the KPA-1500 as I plan to
get serious chasing
Any side by side with the KPA1500 and the Flex Power Genius yet?
73,
Gary K9GS
Original message From: j...@kk9a.com Date: 7/23/18 9:19 PM
(GMT-06:00) To: 'Elecraft Reflector' Subject:
[Elecraft] Amp comparisons
I have yet to see a pre-owned KPA1500 for sal
After much investigation and consideration I elected to purchase the
KPA-500/F. Since I have the K3S and now the KAT-500, I've "trained"
the KAT-500 for the antennas and frequencies on each band. With the VFO
tracking, I dial the frequency and everything follows.
Specifically the KPA-500 I
I have yet to see a pre-owned KPA1500 for sale but I do see a lot of used
KPA500's and KAT500's. I saw this one earlier today:
https://swap.qth.com/view_ad.php?counter=1394347
John KK9A
Rick Reynolds NJ5W wrote:
I was expecting to see more kpa500's for sale but haven't seen many.
Thanks
R
I ran my 1;2 KW amp at 500 watts for close to a year before springing
for the KPA500 just to see if it made any difference. It probably would
have were I an avid DX'er or contester. At my casual level, I really
noticed no difference. With a K3 I think the algorithm is:
if(I_want_full_power)
Rick,
I have a KPA-1500 and a KPA-500. To be honest, with my decent antenna
system, 500 watts is plenty, most of the time. I purchased the KPA-1500
as I plan to get serious chasing DX on the low bands.
If you already have a K3 I would stay with Elecraft and get either KPA
model, you just
Reynolds
Date:
7/23/18 20:22 (GMT-06:00) To:
elecraft@mailman.qth.net Subject: [Elecraft] Amp
comparisons I'm looking at upgrading my amp. In
consideration are kpa500, spe 1.3k, and kpa1500.
Obviously increasing In cost as we gain more
capabilities. Any feedback from the group? I
l be a KPA-1500.
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Rick Reynolds
Date: 7/23/18 20:22 (GMT-06:00) To: elecraft@mailman.qth.net Subject:
[Elecraft] Amp comparisons
I'm looking at upgrading my amp. In consideration are kpa500, spe 1.3
I'm looking at upgrading my amp. In consideration are kpa500, spe 1.3k, and
kpa1500. Obviously increasing In cost as we gain more capabilities. Any
feedback from the group? I was expecting to see more kpa500's for sale but
haven't seen many.
Thanks
Rick NJ5W
_
17 matches
Mail list logo