Hi Martin,
K3 0 ---> band decoder BCD1
K3 1 ---> band decoder BCD2
K3 2 ---> band decoder BCD3
K3 3 ---> band decoder BCD4
should work to your needs
I am using the first version of the band decoder from remoteqth.com
You can drop me an email to dl2...@darc.de
73 de Chris, DL2MDU
Elecrafters,
i control a 6*2 switch via a remoteqth.com Band Decoder II using RS-232
sniffing mode. Not happy with that. I like to switch to Band Data output
from the 15-pin sub-D ACC connector, but am a bit confused.
The band decoder manual shows connections labeled BCD-1 through BCD-4.
The K3
Steve,
I am not familiar with the Acom amp and its needs, but if it needs 4
discrete band data lines, those are available on the ACC connector. See
the K3S manual for the pins.
The only lines on the RS-232 line (or USB) are RXD, TXD and Signal
Ground, and band data is present on the communi
Elecraft] band data from the RS232 port while using the USB cable?
Brand new to the K3S. Is there a way to get band data to control an Acom amp on
the RS232 port while using the USB cable? I had a lot of trouble with Win10
assigning the radio to ports already in use when I tried using the RS
Brand new to the K3S. Is there a way to get band data to control an Acom amp on
the RS232 port while using the USB cable? I had a lot of trouble with Win10
assigning the radio to ports already in use when I tried using the RS232 port.
Going in and manually changing the port number in Device Mana
nt: Thursday, May 22, 2014 7:49 AM
Subject: [Elecraft] Band Data
When you switch bands on the K3, is Band Data available to the user ?
Is that data written down anywhere, that I can get to ?
Reason I ask, is I want to investigate building an interface between the
K3
and the SPE 1.3K-FA Amp to
Dick,
See pages 18 and 19 of the K3 Operator's Manual for information on the
band data outputs.
73,
Don W3FPR
On 5/21/2014 9:49 PM, Richard Solomon wrote:
When you switch bands on the K3, is Band Data available to the user ?
Is that data written down anywhere, that I can get to ?
Reason I a
How about using the BAND0-3 OUTPUT pins on the ACC jack?
Bruce N1RX
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Richard Solomon
Sent: Wednesday, May 21, 2014 9:50 PM
To: elecraft
Subject: [Elecraft] Band Data
When you switch bands on the K3
I have an SPE 1K-FA and my K3 switches bands with no mods, just a cord. The
band data is available on the 15 pin D Shell connector on the back. My
TS-480SAT has some issues but does most of the functions. I don't know, but
suspect that the 1.3K works like the 1K.
Willis 'Cookie' Cooke, TD
When you switch bands on the K3, is Band Data available to the user ?
Is that data written down anywhere, that I can get to ?
Reason I ask, is I want to investigate building an interface between the K3
and the SPE 1.3K-FA Amp to facilitate automatic bandswitching on the Amp.
73, Dick, W1KSZ
__
Is it possible to pull band data off the KX3 and send it to the KAT500 so
it will follow the radio?
Thanks, Dan
--
KM6CQ
Dan Baker
www.km6cq.com
@danielbaker
DM09dn
SKCC: 8260 NAQCC: 6817
QSL via LoTW, eQSL, & Direct.
D-Star REF014C
Subich, W4TV"
To: "'w0uo'" ;
Sent: Tuesday, November 17, 2009 6:36 PM
Subject: Re: [Elecraft] Band data outpurs
>
> Yes. Please see N0SS's excellent documentation on connecting
> the K3 to a Quadra amplifier. The cable shown on that page
> (http:
uot; jack.
73,
... Joe, W4TV
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w0uo
> Sent: Tuesday, November 17, 2009 12:15 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] Band data outp
> Please see the K2 Owner's Manual for details. The information is on
> pages 18 and 19 in the Rev D-5 manual.
I meant K3...
73,
Lyle KK7P (searching for my coffee...)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
> Can anyone tell me if the K-3 band data outputs are the same as Yaesu? If
> so, what are the pin equivalents? I would like to use my K3 with an Array
> Solutions band decoder (an older style.
Please see the K2 Owner's Manual for details. The information is on
pages 18 and 19 in the Rev D-5 ma
Can anyone tell me if the K-3 band data outputs are the same as Yaesu? If
so, what are the pin equivalents? I would like to use my K3 with an Array
Solutions band decoder (an older style.
Jim
W0UO
__
Elecraft mailing list
Home: http
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jack Brindle
Sent: Tuesday, March 14, 2006 10:11 AM
To: [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Band data
I can answer that. By far the best way to get band data is to decode
the frequency returned by an
I can answer that. By far the best way to get band data is to decode
the frequency returned by an IF; serial command. Having the frequency
allows you quite a bit of freedom in what you do with it, especially
since you can create "sub bands" or segments within each band. This
could be useful
Sure Jim .. it's called the KRC2 :)
de w1rt/john (KRC2 user)
On 3/14/06, Jim Chick <[EMAIL PROTECTED]> wrote:
> Is it possible to access K2 band data information in order to make it
> available in some format to control external devices?. Thanks for any help.
Is it possible to access K2 band data information in order to make it available
in some format to control external devices?. Thanks for any help.
Jim G4NWJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to th
20 matches
Mail list logo
