After I go to the firmware tab, if I click "Check Versions Now" the
utility will not proceed until the files are downloaded from Elecraft,
as there is nothing to compare. I do not get a loop of trying to connect.
Are you using version 1.12.3.28 of the utility?
HTH.
73, Mike
> Mike NF4L wrote :
Connect K3 USB FTDI cable direct to K3 and try the K3 update again.
It sounds like There is a P3 in there, that needs updating too, and has the
piggyback connection across to the K3 with the main connection to P3?
In anycase, If it is the later FTDI type usb-ser cable then this program
will
Mike NF4L wrote :
>No problems here, Ken. Some more info about Aki's problems would
probably help.
What _*exactly*_ is his issue?
Utility doesn't run? Error messages?
Utility doesn't connect to rig? Cable type? (Rs_232 or USB) Com port
number assigned in Win7?
Utility connects, but load fa
The Prolific drivers have been problematic in recent years. 73, Guy.
On Fri, Sep 28, 2012 at 1:56 PM, Brian Hunt wrote:
> I recently upgraded to a Windows 7-64 bit HP machine due to the demise
> of my Windows XP Pro laptop. The biggest problem I had was going from a
> physical RS232 serial port
I recently upgraded to a Windows 7-64 bit HP machine due to the demise
of my Windows XP Pro laptop. The biggest problem I had was going from a
physical RS232 serial port on the laptop to a USB to RS232 converter. I
tried several failures before I hit on a solution that worked. It is a
USB/RS
No problems here, Ken. Some more info about Aki's problems would
probably help.
What _*exactly*_ is his issue?
Utility doesn't run? Error messages?
Utility doesn't connect to rig? Cable type? (Rs_232 or USB) Com port
number assigned in Win7?
Utility connects, but load fails?
Wind from the No
Your post will probably produce a humungous volume of responses...I am
getting in early (12:33 AM 9/28). I have been using several machines
running WIN 7 both 32 and 64 bit with my K3 and have never had a problem
making firmware upgrades to the K3, the P3, and to the XG3. Normally I
use my 32 b
Has anyone on the list experienced problems with Win7 when attempting a K3
firmware upgrade?
My friend Aki ZL1GO has attempted the upgrade using his new Win7 computer
without success - no
problems with his old XP machine.
I have only XP, so I can't help him.
73,
Ken ZL1AIH
_
8 matches
Mail list logo