Elecraft has Always made things right for any issue I've had with them.
From: Bill Wilkins
To: elecraft@mailman.qth.net
Sent: Wednesday, February 18, 2015 5:59 PM
Subject: Re: [Elecraft] Scratched off screen printing on a week old KX3?
Glad it is working out for you.
I adm
Glad it is working out for you.
I admit my past suggestions were a bit lame and I apologize. I may have been
having a migraine that day or something.
73, Bill, WD8JWJ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Scratched-off-screen-printing-on-a-week-old-KX3-tp7598696
Isn't Wayne one of the Elecraft principals? *rotfl* ;-)
73, Olli - DH8BQA
Contest, DX & radio projects: http://www.dh8bqa.de
Am 17.02.2015 um 22:32 schrieb Michael Walker:
Instead of complaining here, have you thought about discussing it with
Elecraft?
No one here can fix your concern, but
gt;
> > On 2/17/2015 1:33 PM, elecraft-requ...@mailman.qth.net wrote:
> >> --
> >>
> >> Message: 3
> >> Date: Tue, 17 Feb 2015 11:14:59 -0500
> >> From: Joshua Gould
> >> To: Elecraft List
> >> Subject: [Elecraft] Scratched
t;
> On 2/17/2015 1:33 PM, elecraft-requ...@mailman.qth.net wrote:
>> --
>>
>> Message: 3
>> Date: Tue, 17 Feb 2015 11:14:59 -0500
>> From: Joshua Gould
>> To: Elecraft List
>> Subject: [Elecraft] Scratched off screen pr
I just got a reply back from Elecraft and am very happy with the proposed
solution. I'm just going to need to swap my SideKX end plate for the
factory ones...
72,
Joshua Gould
K8WXA
EM89pn
KX3# 7465
On Tue, Feb 17, 2015 at 3:37 PM, Phil Wheeler wrote:
> Yeah, G5RVs are vulnerable. I'm in the
I just “tested” the durability of the yellow paint on my KX3 # 5539. Pushed
pretty hard with the edge of my fingernail and no way was that paint coming
off. Bad paint job somehow slipped through. Elecraft will most certainly make
good on it.
Jim / W6JHB
> On Tuesday, Feb 17, 2015, at Tuesda
Live with it? I sure hope he does not! Nor do I
agree with the other bandaid approaches below.
He should:
* Get a new front panel from Elecraft
* Buy some fingernail clippers :
Phil W7OX
On 2/17/15 10:51 AM, Bill Wilkins wrote:
You could place a small piece of Scotch tape over the remain
I've sent a message off to Elecraft and we'll see what they say.
72,
Joshua Gould
K8WXA
EM89pn
KX3# 7465
On Tue, Feb 17, 2015 at 2:50 PM, Scott Manthe
wrote:
> The point is, of course, that the printing shouldn't come off quite so
> easily, especially on a 1 week old radio. The original poster
The point is, of course, that the printing shouldn't come off quite so
easily, especially on a 1 week old radio. The original poster has a
valid concern. Minor to you, possibly, but the front panel printing on a
transceiver shouldn't scrape off with a brush of the fingernail.
73,
Scott, N9AA
7 Feb 2015 11:14:59 -0500
From: Joshua Gould
To: Elecraft List
Subject: [Elecraft] Scratched off screen printing on a week old KX3?
Message-ID:
Content-Type: text/plain; charset=UTF-8
I was moving my hand from the keyboard to the radio and brushed my
fingernail against the yellow word tune b
You could place a small piece of Scotch tape over the remaining letters.
Or go to the craft shop and buy some yellow paint and a super fine tip brush
and touch up the letter.
Find a label maker that can print a yellow TUNE and overlay a new TUNE.
Or, just live with it.
73, Bill, WD8JWJ
--
View t
I was moving my hand from the keyboard to the radio and brushed my
fingernail against the yellow word tune before realizing that my finger was
too low to get to the band switches. I managed to scratch the U out of the
yellow word tune on the front of my case.
Can I expect the rest of the yellow f
13 matches
Mail list logo