Charlie,
Did you mean the K3 or the KX3? I assume the KX3 since you did not list
the K3 previously.
In the cable between the KX3 and the KXPA100, there is a box with an RCA
jack for Keyout to another amplifier. Just connect that to your amp's
Keyin (or PTT) jack, and the 811 amp will key.
Did not know I could connect the KXPA 100 to the K3. Still learning the
Elecraft line.
I think the KXPA 100 is first on my list. Then maybe swap the 756 for the
7300. That way I get a new radio with a panadaptor. I can then start saving for
a K3s down the road.
Thanks to all for the info
Cha
OK - let me clarify: The 7300 is a fine little rig. For the price, I
doubt if it can beaten. That said, I have been very pleased with my K3
for over six years and if it was to quit tomorrow - I would pick up the
phone and order its replacement (K3S) with overnight shipping. Cannot be
without i
> From: Charles Carlon
> Very good point. I am not sure what my options would be if the 756 broke
and John KK9A replied:
> Perhaps send the broken 756 to Icom America for repair.
About 5 years ago I needed service on a very high end Icom
Communications Receiver that was 20+ years old. IcomAmerica
Perhaps send the broken 756 to Icom America for repair.
But I agree with K4TO that Elecraft customer service and support is second
to none. Their email response time is quick and I feel confident that
parts for my K3S's will be available for a long time.
John KK9A
From: Charles Carlon
Very goo
M
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Shack project
I cannot advise you on what to do - but: In my mind, the 7300 is
affordable and first class (so says Sherewood). It is all in one box
with a good display and does everything an HF rig should do without the
need of expensive add
Very good point. I am not sure what my options would be if the 756 broke
Charlie
Sent from my iPhone
> On Mar 3, 2018, at 08:27, Dave Sublette wrote:
>
> No doubt there are good radios available. But just remember. If it
> breaks, someone has to fix it. Elecraft is the ONLY manufacturer I k
No doubt there are good radios available. But just remember. If it
breaks, someone has to fix it. Elecraft is the ONLY manufacturer I know of
that will send me an email from support with hints and helpful suggestions
BEFORE I contact them. I Went first to TenTec many years ago and then to
Elecr
I cannot advise you on what to do - but: In my mind, the 7300 is
affordable and first class (so says Sherewood). It is all in one box
with a good display and does everything an HF rig should do without the
need of expensive addons (100 Watts, auto tune, SWL coverage, filters).
It has been out l
Charlie,
Since the KPA100 is an add-on for the K2, I assume that you mean the
KXPA 100. Why can't you drive your 811 with a KXPA100?
73,
John
AC0ZG
On 3/2/2018 7:41 PM, Charles Carlon wrote:
Time to update and organize the Shack. I currently have
Icom 756 Pro III
Icom 7100
KX3 with Panadapt
Time to update and organize the Shack. I currently have
Icom 756 Pro III
Icom 7100
KX3 with Panadaptor
Ameritron 811
Work SSB and digital modes
QRP with the KX3 battery and solar
Not a contestor and not good enough yet for CW
Upgrade options
Sell 7100 and buy KPA 100 or Icom 7300
Sell 756 a
11 matches
Mail list logo