Well, just go through the final assembly tests and started the alignment
testing. I was feeling good when all the resistance checks were good. But
then I did the 40m transmitter test, per the book.
When I set the power out to 2.0 watts, then hit the TUNE button, I got wildly
varying output
Mike, are you talking about a K2? If so, check R66 and R69.
R66, 2.7k (red-vio-red) is closest to connecter P3 and the edge of the board
while R69, 100k (brn-blk-yel) is farthest from the edge of the board.
If they are reversed, the RF detector will work, sort of, but the readings
well be very
2 matches
Mail list logo
