Howdy
Been using my K3s (S/N 10462) for JT-65/JT-9 and am struggling with setting
the ALC. I am using the Mic Gain control for fine tuning---unbelievably fine.
You really can't actually touch the knob, you just breath on it or think hard
about moving it! It is the most sensitive control I
Sid,
While I am not using a K3 (I am running a KX3/KXPA100), I can give you a
general guideline of how I control things here for successful operation in JT.
It should give you a general guideline on what to initially adjust, look for,
and set up for your K3 / computer / software package.
My
Sid,
What mode? SSB or a soundcard data mode?
For SSB, did you first set Compression to zero? If not, you should do
that (Data modes do that automatically for you).
For SSB, you want 5 to 7 bars, but for DATA modes, you want 4 bars solid
with the 5th bar flashing.
Set the soundcard output slid
Reduce the signal level on the computer output. Somewhere. Near 30% will often
give you nice control with Lin In control (Mic gain).
Sent from my iPhone
...nr4c. bill
> On Feb 27, 2016, at 5:17 PM, Sid Frissell wrote:
>
> Howdy
> Been using my K3s (S/N 10462) for JT-65/JT-9 and am struggli
Dave:
This is a great post. I am not currently working JT but you just motivated me.
I will begin using it. Thank you for taking your time to write this very useful
set of instructions.
Ramon
NQ9V
> On Feb 28, 2016, at 9:00 AM, N5XL . wrote:
>
> Sid,
>
> While I am not using a K3 (I am
I don't use JT modes, but on RTTY and PSK I've found a similar issue with my
K3S. I've mentioned it here in the past more in reference to the built-in sound
card super sensitivity affecting VOX setup. The best I've done is to go into
the Windows Sound setup and reduce the output (speaker) gain
6 matches
Mail list logo