Put it into TX on a dummy load and run your batch file and find out!
73 de David, M0XDF (K3 #174, P3 #108)
On 7 Aug 2013, at 04:35, drewko wrote:
Ray,
Tks again for the idea. I now have the batch files set up to switch
the K3's ANT every hour, half-hour or 15 mts while WSPR is running.;
Even with dummy loads connected I'd hesitate to hot switch ANT.
Perhaps could try it while transmitting at 0 watts?
73,
Drew
AF2Z
On Wed, 07 Aug 2013 09:25:24 +0100, you wrote:
Put it into TX on a dummy load and run your batch file and find out!
73 de David, M0XDF (K3 #174, P3 #108)
On 7
I've been doing some performance comparison between two antennas I am
using. I'm compiling data of my WSPR transmissions and spots over
periods of many hours. I got a little carried away and made up a
spreadsheet to compare reciprocal signal reports as well as the
performance differences between
Here is a link that may answer part of the question:
http://batchloaf.wordpress.com/2013/02/12/simple-trick-for-sending-characters-to-a-serial-port-in-windows/
His simple method of doing echo hello or your command string to
com1 would probably work. You could then make that a batch file to
:36:39 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Antenna comparisons, WSPRnet and timed serial port
macros
I've been doing some performance comparison between two antennas I am
using. I'm compiling data of my WSPR transmissions and spots over
periods of many hours. I got
Brian,
Yes, I want to send the ANT 1/2 switch command to the K3, say every
quarter hour. I believe there is no serial port rig control from the
WSPR software to contend with, just the tones from the soundcard that
key the rig periodically.
So, I just need a utility to send the ant switch
Ray,
Thanks! That's what I had in mind... I believe it is the AT command
(not ON). Also, SCHTASKS perhaps...
73,
Drew
AF2Z
On Tue, 06 Aug 2013 12:52:57 -0500, you wrote:
Here is a link that may answer part of the question:
Ray,
Tks again for the idea. I now have the batch files set up to switch
the K3's ANT every hour, half-hour or 15 mts while WSPR is running.;
no other software needed.
My only question is: what happens if the K3 receives a serial command
to switch ANT while it is transmitting? I assume the
8 matches
Mail list logo