On 8/23/2017 5:56 AM, geoffrey allsup wrote:
> I noticed this issue when I first assembled my KX3. The simple cure
> for me after tightening the BNC a couple of times early on was to use
> a right-angle BNC adapter all the time. No more problems, and the
> coax conveniently pays off to the rear
I noticed this issue when I first assembled my KX3. The simple cure for me
after tightening the BNC a couple of times early on was to use a right-angle
BNC adapter all the time. No more problems, and the coax conveniently pays off
to the rear of the rig :-)
73,
geoff - W1OH
If you mean the whole connector is loose on the KX3, you have to get inside and
tighten the nut holding it on to the box. I just did this, and it was easier
than I thought. You have to open up the radio and look where the connector is
attached. I had a 2-meter board and an ATU board
3 matches
Mail list logo
