Sure, Keith. Connect the K3 RS232 port to the P3 and the P3 to your
computer.
73,
/Rick N6XI
On Fri, Apr 9, 2021 at 6:34 AM Keith Orchard via Elecraft <
elecraft@mailman.qth.net> wrote:
> I use Logger32 for logging and it has occurred to me I could connect my K3
> to my laptop to get automatic
I use Logger32 for logging and it has occurred to me I could connect my K3 to
my laptop to get automatic band-logging.
I run a K3, KPA500 & P3. Can I use the RS232 connector on the K3 to connect to
my laptop? Currently I use that connector to connect to the P3.
Help would be appreciated.
Keith G
... In other
words, will most if not all of the rig's functionality be controllable using
a software interface such as Simon's Ham Radio Deluxe?
Ultimately, yes. Every control on the K3 is read by the same MCU that
interfaces to the serial port. There are no signals that pass through
any swit
The word is that anything that can be done from the front panel can be
done from the computer interface.
73, doug
From: "Robert Dwiggins II" <[EMAIL PROTECTED]>
Date: Fri, 4 May 2007 18:12:35 -0500
I was looking at the specs on the K3, and they look impressive. However, I
was wonder
I was looking at the specs on the K3, and they look impressive. However, I
was wondering which CAT functionality will be included. Will it be possible
to control the pot settings (AF/RF/mic gain/NB gain, notch, passband tuning,
variable bandwidth IF filtering, etc etc) via the RS232 port? In oth
5 matches
Mail list logo
