It is the KX3. KS
Sent from my iPad
On Sep 17, 2014, at 1:11 PM, Matt VK2RQ matt.vk...@gmail.com wrote:
MN012;SWT019;MN255;
(assuming KX3, since the procedure below applies to that radio)
73,
Matt VK2RQ
On 17 Sep 2014, at 9:41 pm, Poul Erik Karlshøj (PKA) p...@telepost.gl wrote:
Could
Could someone please write a Macro that does that?
73/OZ4UN
Den 16/09/2014 kl. 13.58 skrev Charles Tropp via Elecraft
elecraft@mailman.qth.net:
On the Configuration Menu go to CW WGHT SSB-CW. Tapping the 1 key toggles
between SSB+CW, which allows CW to be sent when in SSB Mode and SSB-CW,
MN012;SWT019;MN255;
(assuming KX3, since the procedure below applies to that radio)
73,
Matt VK2RQ
On 17 Sep 2014, at 9:41 pm, Poul Erik Karlshøj (PKA) p...@telepost.gl wrote:
Could someone please write a Macro that does that?
73/OZ4UN
Den 16/09/2014 kl. 13.58 skrev Charles Tropp via
I am trying to find the place in the menu system where I can turn on the CW
while in SSB mode is located. I have heard that it is in the CW features but I
find nothing there. Can anyone tell me how to find this? Gerry Leary who
hopes that Elecraft implements the rest of the CW read out
On the Configuration Menu go to CW WGHT SSB-CW. Tapping the 1 key
toggles between SSB+CW, which allows CW to be sent when in SSB Mode and
SSB-CW, which doesn't. The other station operating SSB will hear your
signal at the tone sent by your sidetone pitch.
73, Charles N2SO
On Tuesday,
Owner's manual version C4 page 37:
CW WGHT
Adjusts element/space timing ratio (weight) for the internal keyer.
Additional functions of this menu entry, via numeric keypad:
Tap 1 to select S S B - C W (default) or S S B + C W (allows CW in SSB
modes).
When CW-in-SSB is in effect, tapping the
Hello Peter,
None of these readings are available to me. I am working with Rob Santello who
makes the hampod to try to implement them. I can not read the display.
Sent from my iPhone this time
On Sep 16, 2014, at 6:01 AM, Peter Eijlander (PA0PJE) pa0...@xs4all.nl
wrote:
Owner's manual
Hello,
I just played again. I did get the Hampod to read the CW-SSB feature. I was
not waiting long enough after pressing the button. I was a little to
impatient. Thanks for the help. Gerry
Sent from my iPhone this time
On Sep 16, 2014, at 6:01 AM, Peter Eijlander (PA0PJE)
Hello Gerry,
I did not realize you are visually impaired.
Charles N2SO sent a message as well in a shorter form effectively
telling the same thing. Of course it depends also on the firmware
version on your KX3 whether this setting is available or not.
Is there anyone else with a good idea
9 matches
Mail list logo
