Yup…I’m good…all is fine. :)
> On Jul 16, 2020, at 2:51 PM, Grant Youngman wrote:
>
> Have you turned up MONitor volume ….??
>
> Grant NQ5T
>
>
>
>
>> On Jul 16, 2020, at 2:36 PM, Doug Daniels wrote:
>>
>> I'm having the same issue with the KX2, what would be the adjustment on
>> that? I
Have you turned up MONitor volume ….??
Grant NQ5T
> On Jul 16, 2020, at 2:36 PM, Doug Daniels wrote:
>
> I'm having the same issue with the KX2, what would be the adjustment on
> that? Is that the Transmit Gate?
>
> On Thu, Jul 16, 2020 at 1:03 PM John Stengrevics
> wrote:
>
>> When I sen
I'm having the same issue with the KX2, what would be the adjustment on
that? Is that the Transmit Gate?
On Thu, Jul 16, 2020 at 1:03 PM John Stengrevics
wrote:
> When I send CW on my K3S, I cannot hear it either on the speaker or
> phones. As most probably are, I am dependent on the auditory
Put the K3 in CW mode, then press and hold the CMP/PWR/MON knob, the
display will change to MON, that is your sidetone adjustment.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 7/16/20
You probably have the TX Monitor set to zero. Press and hold for 3 sec the
Comp/Pwr knob. VFO B display will change to TX MON and show setting. Adjust as
needed (2-5 should be in ballpark).
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 1:05 PM, John Stengrevics
> wrote:
>
> When
When I send CW on my K3S, I cannot hear it either on the speaker or phones. As
most probably are, I am dependent on the auditory feedback to send CW properly.
I suspect I have a setting wrong.
Any advice would be much appreciated.
73,
John
WA1EAZ
__
6 matches
Mail list logo