Don't worry about the carbon in the pole. It is bound up in a matrix of
plastic such that it does not make a good conductor. You can check with an
ohm meter two places say a foot apart; what does that read on your pole?
(don't break the outer covering, just hold the probe side against the pole
I use one of the squeeze to open things for grasping two cords on a backpack.
A large one has a hole big enough slide down the tip a foot or two. I attached
a wire loop to that from which to hang things.
I have also glued such a device to a piece of plastic that was serving as a
center insula
Another way to do this:
To attach a wire to the end of a fishing pole like the DK9SQ I tape the
wire to a two inch piece of small diameter polyethylene tubing. This is
slipped over the end of the pole and the taper of the pole holds it in
position. Choose a diameter small enough to fit as clo
Hello,
Today I went to Cabela's and picked up a replacement fishing rod tip to
make a modification to my DK9SQ pole.
I super glue or you can epoxy it to the top. Now I have a place to hang the
vertical wire.
72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/
K1 - SN 01011
K2
4 matches
Mail list logo
