I think RF is getting into headset. Time to try ferrite beads.
Ray
W8LYJ
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On Mon, Mar 4, 2019, 6:22 AM Dave Cole (NK7Z) wrote:
> Does FAST also remove the light delay in the audio?
>
Yes. However, with FAST enabled, you cannot hear what the speech
compressor is doing. Everything you hear while transmitting is
"unprocessed."
73,
Bob, N6TV
Does FAST also remove the light delay in the audio?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/3/19 7:01 PM, Bob Wilson, N6TV wrote:
Check CONFIG:TX MON, to see if it is set to NOR
Check CONFIG:TX MON, to see if it is set to NOR or FAST (FAST should have
no "distortion", because you hear unprocessed MIC audio, with no delay).
This applies to both your own MIC audio and KDVR3 recordings.
Check also CONFIG:TX DVR. Is it set to NOR or IND? If IND, there are two
different
When I play a recorded message audio transmitted is ok , confirmed by listeners
and monitoring remote SDR.
What I hear in my earphones with monitor turned on is distorted.
Ray
W8LYJ
Sent from my iPad
__
Elecraft mailing list
Home:
I recently got a DVR and put together some of my thoughts on how it
operates gleaned from previous discussions on the reflector. I put a pdf
up on http://www.ke7x.com/home/the-dvr
As always, comments gratefully accepted.
Cheers,
Fred, KE7X
Fred Cady
fcady at ieee dot org
Thanks for posting that Fred. It is a great help for DVR operation,
Todd, WA7U
- Original Message -
From: Cady, Fred fc...@ece.montana.edu
To: elecraft@mailman.qth.net
Sent: Thursday, March 31, 2011 10:00 AM
Subject: [Elecraft] DVR Audio
I recently got a DVR and put together some
7 matches
Mail list logo
