While waiting the arrival of my K3S, the question arises for the
requirement for a Windows driver for USB connecton. Is there something
special required for Windows 7 Pro 64 bit system? I didn't see anything
in the Owners Manual, but I could have missed it too.
Also, is anyone aware of
The KIO3B includes an FTDI-based serial port (drivers widely available
for all sorts of OSes and versions of same) and a UAC1-compliant CODEC
(driver built in to most OSes since late in the last millennium). It
works fine with DM780 and other digital mode programs, you just need to
set it up
I would suspect Elecraft has adopted a trusted and proven USB interface,
maybe even that of FTDI in which case, if the drivers are not already on
your system, they are easily downloaded from the FTDI website. As the
new interface board in the K3s has its own USB Codec as I seem to
recall,
Given the need to support both audio sound card data and
RS-232 data, I would expect the USB driver in the K3S to first
simulate a USB hub and then these two USB devices. Someone with
a K3S can verify this, at least on a Mac, with the USB
information from the hardware information. On the mac
There is a hub on the KIO3B main board, with its downstream ports
connected to the Codec and to a FT232R USB/serial chip.
73,
matt
W6NIA
On Mon, 20 Jul 2015 07:43:29 -0700, you wrote:
Given the need to support both audio sound card data and
RS-232 data, I would expect the USB driver in the K3S
5 matches
Mail list logo