Does anyone have a wiring diagram for the 15 pin cable that will go from the K3
to the THP 2.5 linear?? or is it straight thru??
Thanks,
PHIL. www.n2bee.net
Sometimes I think I understand everything, then I regain consciousness
__
The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the 15-pin
HD D-connector. Nothing special needs to be done, other than finding the
pin outs from the manuals. The THP 2.5 even has pull-up resistors so early
K3 radios will drive the band data input just fine (NOT the case
Subject: Re: [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5
The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the 15-pin
HD D-connector. Nothing special needs to be done, other than finding the
pin outs from the manuals. The THP 2.5 even has pull-up resistors so early
K3 radios
Contact either of the US Distributors for the Tokyo High Power
amplifiers for that data. They are HRO and Array Solutions.
Information is in the HL-2.5Kfx manual (use the Yaesu data).
Good luck.
73,
... Joe, W4TV
On 5/28/2010 11:30 AM, PHIL wrote:
Does anyone have a wiring diagram for
Subject: Re: [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5
The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the 15-pin
HD D-connector. Nothing special needs to be done, other than finding the
pin outs from the manuals. The THP 2.5 even has pull-up resistors so early
K3
From: Phil Debbie Salas dpsa...@tx.rr.com
To: elecraft@mailman.qth.net
Sent: Fri, May 28, 2010 11:55:54 AM
Subject: Re: [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5
The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the 15-pin
HD D-connector. Nothing special needs to be done, other than
TO TOKYO HY-POWER 2.5
Hi All,
I have a a Tokyo High Power 1.1KX amp and would like to know if my K3 SN
2704 has this ALC modification installed already? Is there a magic place
to look this up?
Thanks in advance,
Dave Anderson, K4SV
Tryon, NC
828 777-5088
www.K4SV.com
- From: Phil Debbie Salas To:
elecraft@mailman.qth.net Sent: Friday, May 28, 2010 11:55 AM Subject:
Re: [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5
The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the
15-pin HD D-connector. Nothing special needs to be done, other than
Debbie
Salasdpsa...@tx.rr.com To: elecraft@mailman.qth.net Sent: Fri, May
28, 2010 11:55:54 AM Subject: Re: [Elecraft] ELECRAFT TO TOKYO
HY-POWER 2.5
The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the
15-pin HD D-connector. Nothing special needs to be done, other than
finding
Subject: Re: [Elecraft] ELECRAFT TO TOKYO HY-POWER 2.5
The THP2.5 uses a regular 15-pin D-connector, whereas the K3 uses the
15-pin
HD D-connector. Nothing special needs to be done, other than finding the
pin outs from the manuals. The THP 2.5 even has pull-up resistors so
early
K3 radios
10 matches
Mail list logo