I ordered a supply of the various screws at Elecraft just to have them at
hand incase one got away from me.
Also I can replace one that gets accidently worn a bit.
-
Chuck, KE9UW
--
Sent from: http://elecraft.365791.n2.nabble.com/
/
On Tuesday, April 13, 2021, 5:31:57 PM MDT, Ray wrote:
Ace Hardware has some screws in Black.
WA6VAB Ray K3 #3824
From: Don Wilhelm
Sent: Tuesday, April 13, 2021 2:49 PM
To: Tommy Judson; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Digest, Vol 204, Issue 6
Tommy,
I highly
@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Digest, Vol 204, Issue 6
Tommy,
I highly recommend that you get the proper screws from Elecraft to be
certain they are the correct length.
Hardware store screw are normally not available in black, so why mess up
the appearance of your KX2 with zinc
Ace Hardware has some screws in Black.
WA6VAB Ray K3 #3824
From: Don Wilhelm
Sent: Tuesday, April 13, 2021 2:49 PM
To: Tommy Judson; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Digest, Vol 204, Issue 6
Tommy,
I highly recommend that you get the proper screws from Elecraft
Tommy,
I highly recommend that you get the proper screws from Elecraft to be
certain they are the correct length.
Hardware store screw are normally not available in black, so why mess up
the appearance of your KX2 with zinc plated screws.
73,
Don W3FPR
On 4/13/2021 11:36 AM, Tommy Judson
Sent: Tuesday, April 13, 2021 12:48:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Digest, Vol 204, Issue 6
On 4/13/2021 8:36 AM, Tommy Judson via Elecraft wrote:
> Bought a KX-2 off the internet and have found that it is missing several of
> the screws that held the end
On 4/13/2021 8:36 AM, Tommy Judson via Elecraft wrote:
Bought a KX-2 off the internet and have found that it is missing several of the
screws that held the end plates on. Asked about that and the seller said he
tried to put some sort of protective end plates onto the radio but couldn’t do
it
If you have any of the remaining screws then take one to the hardware store
when you go. They will do a perfect match for you. They use an aluminum
template folds referred to as a Screw Checker to make sure it is correct. The
sis not an “eyeball exercise.” There is nothing about that screw
Make a bad purchase good?
Bought a KX-2 off the internet and have found that it is missing several of the
screws that held the end plates on. Asked about that and the seller said he
tried to put some sort of protective end plates onto the radio but couldn’t do
it so threw them away and put the
9 matches
Mail list logo
