FWIW back in the 80s, I had installed a new ground plate for the shack and
wanted to ensure that it really was the best ground possible.
I used a trick that was used by the telecom people, where they connected the
local exchange battery across two plates and blew off all the crud. 50 volts
at many hundreds of amps did the business.
My way was to connect my ground plate to the incoming 240 volt supply main,
via a MCB and each time the MCB tripped, I substituted bigger one until I
had no more larger values. ISTR I got to 40 amps and settled for that.
I had obviously made sure that no person or animal could get near the area
whilst the power was on, but I was quite surprised to see how many
earthworms had scuttled their way to the surface. <grin>
73,
Alan. G4GNX
-----Original Message-----
From: Phil Hystad
Sent: Sunday, April 2, 2017 6:31 PM
To: Mike Rhodes
Cc: Elecraft Reflector
Subject: Re: [Elecraft] KAT500 tuning behavior when the load is impossibleto
match ?
Your story reminds me of a scene from that Godzilla movie with Matthew
Broderick where he is “pumping” over sized worms from the ground using
electricity.
73, phil, K7PEH
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com