Re: [Elecraft] FW: KE7X KRC2 app note

B10 then the respective outputs will be as shown in Table Y." I will make further comments to your other posting. Wes --- On Mon, 7/1/13, Jack Brindle wrote: > From: Jack Brindle > Subject: Re: [Elecraft] FW: KE7X KRC2 app note > To: "Wes Stewart" > Cc: "Elecr

Re: [Elecraft] FW: KE7X KRC2 app note

h I consider "normal." > > Also note the "Band6" display is what shows after a tap of the "1" key. It's > always unclear to me whether the display indicates what's going to happen > after the key press or the current state of the parameter. I

Re: [Elecraft] FW: KE7X KRC2 app note

of the "1" key. It's always unclear to me whether the display indicates what's going to happen after the key press or the current state of the parameter. I'm assuming the latter. Wes N7WS --- On Mon, 7/1/13, Cady, Fred wrote: > From: Cady, Fred > Subject:

[Elecraft] FW: KE7X KRC2 app note

Thanks John, that's great information. How is the KRC2 receiving the band data? Via the AUXBUS? Thanks, Fred (And thanks Ian for: "The manual says (on page 25 of rev C): "The remaining four drivers, labeled A, B, C and D, are TTL-compatible inputs or outputs depending on the operating mode.