: Saturday, April 22, 2017 3:03 PM
To: Clay Autery ; Erik Basilier ;
elecraft@mailman.qth.net
Subject: RE: [Elecraft] FW: Handles and feet
How about a small block under the soft handle? The handle would then easily
protect another piece of equipment.
73,
Bill
K9YEQ
-Original Message-
From
22, 2017 1:12 PM
To: Erik Basilier ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] FW: Handles and feet
I have given a "proper" spacing/protecting engineering solution serious thought
on a number of occasions.
__
Elecra
; elecraft@mailman.qth.net
Subject: Re: [Elecraft] FW: Handles and feet
I have given a "proper" spacing/protecting engineering solution serious thought
on a number of occasions.
I will simply come up with something that meets the requirements when I get to
that bridge.
I'm m
able
> for what it is. For me it is not immediately affordable, but that is a
> separate issue. Maybe one day
>
> 73,
> Erik K7TV
>
>
>
> -Original Message-
> From: Clay Autery [mailto:caut...@montac.com]
> Sent: Saturday, April 22, 2017 1:14 AM
>
ce of gear get a scratch on it, luckily it was on a piece I made so I could
repaint it to match.
From: Erik Basilier
To: 'Clay Autery' ; elecraft@mailman.qth.net
Sent: Saturday, April 22, 2017 12:35 PM
Subject: Re: [Elecraft] FW: Handles and feet
Clay wrote: " I am
one day
73,
Erik K7TV
-Original Message-
From: Clay Autery [mailto:caut...@montac.com]
Sent: Saturday, April 22, 2017 1:14 AM
To: Erik Basilier ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] FW: Handles and feet - was KPA 500 vs New 1500 watt
amp
Never said I would use that so
Goo Gone will remove an ugly (or pretty) residue of glue.
73,
Stan, WA1LOU
On 4/22/17 1:32 AM, Erik Basilier wrote:
From: Erik Basilier [mailto:ebasil...@cox.net]
Sent: Friday, April 21, 2017 9:45 PM
To: 'Harry Yingst'
Subject: RE: [Elecraft] Handles and feet - was KPA 500 vs New 150
PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] FW: Handles and feet - was KPA 500 vs New 1500 watt
> amp
>
> OK.
>
> 1) For the "feet", find a supply of little discs of desired thickness made
> from Sorbothane.
> 2) Buy the appropriate 3M Command s
(adding more feet like the existing side feet, or slightly thicker) from
Elecraft might not.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Clay
Autery
Sent: Friday, April 21, 2017 10:37 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] FW: Handles
OK.
1) For the "feet", find a supply of little discs of desired thickness
made from Sorbothane.
2) Buy the appropriate 3M Command strips. removable. Even if the
glue goes, it will come right off.
Or you can do the research and get the right glue chemistry for the
application and have it
From: Erik Basilier [mailto:ebasil...@cox.net]
Sent: Friday, April 21, 2017 9:45 PM
To: 'Harry Yingst'
Subject: RE: [Elecraft] Handles and feet - was KPA 500 vs New 1500 watt amp
Harry, I have considered doing the same. However, my experience with using the
stick-ons is that the glue g
11 matches
Mail list logo
