Gordon,
During operation of the K2, the reference oscillator is not used except as
the oscillator for the microprocessor - so there will be no observed effect
from changing the C22 setting.
During the calibration steps (for an accurate CAL FCTR reading, and before
running CAL PLL or CAL FIL), the
Gordon Gibson wrote:
a local pal who has recently built a K2 has found the same problem when
he built his K2 he calibrated C22 okay but now finds that moving C22
does nothing I have studied the circuit and I just can not figure out
why this should be so
The exact frequency of the 4 MHz oscil
Hi Elecrafter's
When I built my K2 #2746 4 years back now I set C22 near enough using an
external frequency counter, then last year I added the SSB board, I noted
that I was about 200 Hz high as I do not work near band edges I left it at
that, but recently decided I would get it a bit nearer h
3 matches
Mail list logo