I run my K3, which has the KIO3B upgrade , making it like a K3S.
I usually have the K3 USB coming int through another USB hub.
(Note that KIO3B has in internal hub branching out to a USB
Audio Codec, and a FTDI USB <--> RS232 interface. As such, all
the RS232 parameters in wsjt-x are used, so i
When setting up radio settings in WSJT-X for the K3/K3S, I keep seeing
different settings for the number of stop bits (one and two) popping up on the
reflector. Am not sure where TWO stop bits is coming from??? On page 20 of
the K3S manual (page 18 of the K3 manual), left hand column, Seria
I’m connecting via USB.
> On Feb 23, 2018, at 9:42 AM, Bob McGraw K4TAX wrote:
>
> I don't find those value to work correctly. The communication between the
> computer and radio is USB. If it were RS-232, maybe so.
>
> Also be sure the Poll Interval on the F2 Setup menu, Radio tab is s
I don't find those value to work correctly. The communication between
the computer and radio is USB. If it were RS-232, maybe so.
Also be sure the Poll Interval on the F2 Setup menu, Radio tab is set
to a value of 1 second.
Via the CONFIG menu, PTT - KEY is set to OFF - OFF, the RS-23
Try this.
> On Feb 23, 2018, at 9:16 AM, Bob McGraw K4TAX wrote:
>
> No issues of that type here. These are my setup numbers:
>
> Baud Rate = Eight
> 38400
> Stop Bits = one two
>
> Handshake = None
>
> PTT method = CAT RTS
>
> Mode = Data/Pkt
>
> Split = Rig Fake It
>
> Also under
No issues of that type here. These are my setup numbers:
Baud Rate = Eight
Stop Bits = one
Handshake = None
PTT method = CAT
Mode = Data/Pkt
Split = Rig
Also under the Advanced tab: Miscellaneous
TX Delay = 0.1 sec.
I'm not running any other applications such as JT Alert, N1NM, etc.
> Begin forwarded message:
>
> From: Richard
> Subject: Re: [Elecraft] K3 And WSJT-X FT8 Timing
> Date: February 22, 2018 at 11:06:58 PM EST
> To: James Bennett
>
> I’m fighting the same problem and MORE. It usually goes like this:
>
> First FT8 (or JT65) activity of the day, the K3S seems t
7 matches
Mail list logo
