hi,
I have the last week problems with the K-3. I will get a msg HI TEMP on display ( by K-3 ON ) , the K-3 is cold with room temp. abouth 15 degrees C. with the msg HI TEMP the PA will bypass and can only use the low power PA ( 15 watts ) , the Fan will gooing on by menu config PA-TEMP , I see a temp switching from - 100 C and -127 C continuing a differents value. in begin this week the problem whas over after 30 min warming up, but now the K-3 will stay in protection, no high power en fans on.. and still the msg HI-TEMP The K-3 is here serial no: 576 software : 04.14 What thit I do: I reset this week the K-3 with the standard values but the problem will stay.... I thit calibration the hole serie 5 watt, 50 watts en 1 Mw calibration, everything is ok with this calibration re-calibrating the PA Temperature Sensor After I set PA TEMP to "R ONLY" instead of "T AND R", I hope that somebody can give me a solution??? best 73 de Wim PA2AM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html