Hardy,
Something wrong when sending to your email directly
-Mensaje original-
De: Jorge Diez - CX6VM [mailto:cx6vm.jo...@adinet.com.uy]
Enviado el: Sábado, 06 de Marzo de 2010 09:12 a.m.
Para: 'Hardy Landskov'
Asunto: RE: [Elecraft] I cannot TX with Heil connected in the back
Yes, you should be able to use the PTT IN connector with your
footswitch, but there seems to be something wrong with your footswitch
or the adapter.
Use your ohmmeter and measure the resistance from the RCA plug to the
shell. It should be infinite with no action at the footswitch, and zero
ohm
Mensaje original-
>De: Hardy Landskov [mailto:n...@cox.net]
>Enviado el: Viernes, 05 de Marzo de 2010 05:30 p.m.
>Para: Jorge Diez - CX6VM
>Asunto: Re: [Elecraft] I cannot TX with Heil connected in the back of the K3
>
>I had trouble like that too. Could not get the ALC
Hardy Landskov'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] I cannot TX with Heil connected in the back of the
K3
Thanks Hardy,
I select rP.H but the problem is that the footswitch doesn´t work connected
to the PTT IN so I couldn´t get on the air.
Any idea about PTT? I have a ERR P
: Viernes, 05 de Marzo de 2010 05:30 p.m.
Para: Jorge Diez - CX6VM
Asunto: Re: [Elecraft] I cannot TX with Heil connected in the back of the K3
I had trouble like that too. Could not get the ALC to register on the meter.
It turns out the Heil HC4 microphone element is low output. Switch your MIC
Hello,
I connected the Heil with Kenwood adapter in the front of the K3 and the
footswitch in the kenwood adapter also and works.
I wanted to connect the microphone Heil and the footswitch in the back, so I
went to the MENU to select rear connection for the mic, connected mic to
mic mono
6 matches
Mail list logo
