I fired up the partially assembled K2 I purchased, and I get an info message
090.
Says it is an EEPROM test #1 failed. Also the display is does not show all
segments, and the
Tuning knob has no effect. I did a complete reset with no effect. I am at
Alignment and Test Part 1.
Mike
AI4NS
Mike,
My recommendation is that you carefully examine the work done so far. Check
each solder connection and check each component for proper value and
placement in the correct holes. Trust that nothing is correct until you
have verified it.
If the display is not showing all segments, try
2 matches
Mail list logo