Sent: Wednesday, May 20, 2020 2:37 PM
To: rocke...@gmail.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K1-4 low power and poor receive on 40 meters
There is the possibility that the 40 meter crystal has low activity.
Check the RF voltage at pin 4 of P1 on the band board. You should read
>> I am going to borrow an RF Power meter with probe and check 30 vs 40 meter
>> readings on the Premix in & out and the RF filter in & out. That will
>> greatly help pinpoint the issue.
>>
>> 73
>> Dave wo2x
>>
>>
>> -Origina
npoint
the issue.
73
Dave wo2x
-Original Message-
From: Don Wilhelm
Sent: Wednesday, May 20, 2020 11:39 AM
To: rocke...@gmail.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K1-4 low power and poor receive on 40 meters
Dave,
Refer to the K1FL4 instructions and re-tune the trimme
pinpoint the issue.
73
Dave wo2x
-Original Message-
From: Don Wilhelm
Sent: Wednesday, May 20, 2020 11:39 AM
To: rocke...@gmail.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K1-4 low power and poor receive on 40 meters
Dave,
Refer to the K1FL4 instructions and re-tune the tri
Dave,
Refer to the K1FL4 instructions and re-tune the trimmers on the filter
board. They MUST be done in the proper band sequence - 30 meters before
40m, 15m before 20m. The PreMixer portion is usually the most critical
for power output.
73,
Don W3FPR
On 5/20/2020 11:20 AM, rocke...@gmail
Hi All,
I am going to sell a K1-4 (4 band 40, 30, 20, 15) for the estate of my
Elmer. In testing the radio I found 40 meters is about 15dB less sensitivity
than 30 and power out about 75 mW. I have double checked the values of
components on the filter board to ensure they are correct and instal
6 matches
Mail list logo