Lloyd,
The first thing you should do is adjust the Pre-mixer and RF Bandpass
filters for the 20 meter band. See the K1 manual for the adjustment
procedure.
If that does not bring the output up to at least 5 watts (when using a
13.8 volt or greater power source), then suspect the 22MHz cryst
> I recently bought a two-band K1, s/n unknown.
> It puts out 6W on 40m, but only one watt on 20m,
> measured with a WM-2...
The most likely problem is misalignment of band 2 of the KFL1-2. Perform a
realignment of the 20m portion per the K1 manual.
Don't waste too much time optimizing the s
I recently bought a two-band K1, s/n unknown. It puts out 6W on 40m, but
only one watt on 20m, measured with a WM-2 and a dummy load... and the
display on the rig. Internal ATU installed. 13+V supply.
What to check first? etc.
__
Elecraft
3 matches
Mail list logo