Thanks to Don and Michael for their advice on the K1. It was indeed a simple
tweak of one of the caps on the filter board (pre-mix) and now all seems well
with my K1.
73,
Paul EI5KI
__
Elecraft mailing list
Home: http://mailman.qth.net
Paul,
Yes, it does sound like your 4 band filter board needs to be re-aligned.
Remove the KAT1 and install the jumper.
In addition, you must set the switch next to the BNC connector to the K1
setting in order to maintain power control.
If you do not have that switch, then you have an older K1 bo
Hi Paul,
It does sound as though the slug-tuned inductors
on the 20 meter and 15 meter sections of the
Filter board need tweaking. As you noted, one
must remove the KAT1 ATU board from the
Filter board to access those coils. It is necessary
to jumper pins 2 and 10 of J2 on the Filter board
to ro
Dear Elecrafters,
I'd like some advice before I go delving into something and making it worse! I
have taken my 4 band K1 out of storage. It is set up for 40m, 30m, 20m and 15m.
It also has the auto ATU. On checking it out I find output as expected on 40m &
30m - 5W set gives 5W out on my dummy
4 matches
Mail list logo