Hi Dennis,
excellent job. Many thanks for sharing it.
Can you advise which direction on the bed is recommended in slicer please?
I am asking as the orientation on the printing plate will be most important
for supports...
Thanks,
Petr
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://o
Very nice. I went a less imaginative direction. A replica of the
original K1 stand.
https://photos.app.goo.gl/1WMjCbeJmLmmJRKf8
https://photos.app.goo.gl/y7FnAUmqgtPQy5ft6
Didn't think it was appropriate to post on Thingiverse as it's a copy of
a proprietary design. I did it as a learning exer
Since Elecraft hasn't had stock on the K1 stand for ages, N3XKB and myself,
designed one that can be 3d Printed. I posted it on Thingiverse for anyone
that would like to print one out.
https://www.thingiverse.com/thing:3843950
73's
Denis
KC6AUP
--
There is no
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
Still looking for the stand Elecraft discontinued for the K1.
If you have one you don't want or use, let me know.
Contact me off line @ ekac...@yahoo.com
ThanksEd n7edk
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailma
Good Morning,
Looking for the stand that Elecraft use to sell for the K1.
If any of you folks have one you don't use/don't want anymore, I'd like to buy
it from you !
Thanks, contact me off-line at ekac...@yahoo.com.
72/73 de Ed
N7EDK
You might want to download the instructions for the KTS1 stand.
Looking at my parts inventory sheet for my KTS1, it looks like its a 10-32
1/2 inch long.
73
Barry K8QI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K1-Stand-Screw-Size-tp7499280p7500658.html
Sent from the El
If there are any manuals that you do not have, just go to the Elecraft
website and download whichever one you are interested in.
73,
Don W3FPR
On 4/25/2012 11:00 AM, Rick Lloyd wrote:
> Thanks for the replies,
>
> The K1 manual doesn't mention the side bolt, as I could tell.
>
> But I was sure s
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K1 Stand Screw Size
Rick,
According to the KTS1 manual, it is 10-32.
Both the diameter, and the thread pitch must match. Common hardware at
the DIY store may be 10-24.
73,
Don W3FPR
On 4/25/2012 8:50 AM, Rick Lloyd wrote:
> Hello all,
>
> I have a
A good hobby shop will carry 10-32 hardware.
73,
Randy, KS4L
On Apr 25, 2012, at 8:01 AM, Don Wilhelm wrote:
> Rick,
>
> According to the KTS1 manual, it is 10-32.
> Both the diameter, and the thread pitch must match. Common hardware at
> the DIY store may be 10-24.
>
> 73,
> Don W3FPR
>
Rick,
According to the KTS1 manual, it is 10-32.
Both the diameter, and the thread pitch must match. Common hardware at
the DIY store may be 10-24.
73,
Don W3FPR
On 4/25/2012 8:50 AM, Rick Lloyd wrote:
> Hello all,
>
> I have a K1 and I’m building a bracket to tilt the rig on my desk.
>
> I am
Hello all,
I have a K1 and I’m building a bracket to tilt the rig on my desk.
I am having trouble figuring out the size of the screw for the side of the
radio.
I’m thinking it’s a #8 but it starts tight and I’m afraid to force it.
Anyone know the proper screw?
Thanks,
Rick
AA4W
Crescent City
12 matches
Mail list logo