Hi Larry,
That's even better, but cables get old and get water in them too.
Mike
-Original Message-
From: Larry Phipps [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 5 April 2006 11:47 PM
To: Mike Walkington
Cc: Elecraft-Reflector
Subject: Re: : [Elecraft] K2, LP-100 and HRD etc
ract" the plots and
end up with the antenna characteristics?
Mike
VK1KCK
K1 #2599
Message: 20
Date: Tue, 04 Apr 2006 13:56:03 -0400
From: Larry Phipps <[EMAIL PROTECTED]>
Subject: Re: [Elecraft] K2, LP-100 and HRD etc
To: Mike Walkington <[EMAIL PROTECTED]>
Cc: Elecraft-Reflector
ps <[EMAIL PROTECTED]>
Subject: Re: [Elecraft] K2, LP-100 and HRD etc
To: Mike Walkington <[EMAIL PROTECTED]>
Cc: Elecraft-Reflector
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
The LP-100 Plot software does this already if you use
The LP-100 Plot software does this already if you use DXlabs Commander
(freeware) or TRX-Manager. It doesn't matter what rig is selected, it
will work with any supported rig. You set the start and stop frequencies
and step size, then hit Run. The program controls the rig and gathers
the data.
All,
It seems to me that is should be possible to write a piece of software that
controls the K2 transmit frequency (steps it up in increments), reads the
LP-100 SWR, power etc, and produces plots for each ham band of frequency
versus SWR, power etc. It would sure be nice if this was built into HR
5 matches
Mail list logo