One of our K2s needs to be converted to a K2/100. Looking over the
instructions I do not see where this is terribly difficult, but I do have a
couple of questions:
Both K2s are totally maxed out with all the options so there is no reason
to use one over the other. If I add the KPA100 kit, will
John,
The normal mounting for the KPA100 is in the same place as the top cover
for the QRP K2. That means the KAT2, KBT2 and KIO2 will be removed.
Optional mounting is to install the KPA100 (usually with the KAT100-2)
in a separate EC2 enclosure. That latter configuration leaves the K2/10
On 9/8/2014 11:01 AM, John Fritze wrote:
Both K2s are totally maxed out with all the options so there is no reason
to use one over the other. If I add the KPA100 kit, will the 20 watt tuner
still be inside
No, it's attached to the top of the K2.
Will it still be available to use if running
The original battery is a sealed Powersonic 2.9AH, mounting flat to the lid
about the width of the K2 and 3 or so inches deep. It fits in front of the
antenna tuner and just behind the speaker.
On Monday, September 8, 2014 2:50 PM, Don Wilhelm w3...@embarqmail.com wrote:
John,
The
I found one, Thanks!
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-10-or-K2-100-Wanted-tp7327005p7332309.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
Looking for a K2. Thanks! Gene N4FZ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-10-or-K2-100-Wanted-tp7327005p7327005.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
6 matches
Mail list logo