Gene,
Intermittent problems are usually caused by a bad connection somewhere.
If it is in a connector, usually removing the connector and replacing it
will wipe away any oxidation interfering with proper contact.
In this case it appears that the MCU is not sensing the KPA100.
I would suggest
This has been an intermittent problem. When the rig sits for a week or so,
Upon powering ON, the RX is muted, the menu setting shows PA _ _ _, and it
will not transmit but shows a HI REFL message. I have it connected to both a
dummy load and a known good HF antenna. In the MENU, I can not adjust th
2 matches
Mail list logo
