Re: [Elecraft] K2 Audio Level using filters

2012-04-17 Thread Earl Richardet
help. Earl VE7Qj -Original Message- From: Don Wilhelm [mailto:w3...@embarqmail.com] Sent: Monday, April 16, 2012 10:18 PM To: Earl Richardet Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] K2 Audio Level using filters Earl, It does sound like you have a problem with the filter swit

Re: [Elecraft] K2 Audio Level using filters

2012-04-17 Thread Earl Richardet
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] K2 Audio Level using filters

2012-04-16 Thread Don Wilhelm
Earl, It does sound like you have a problem with the filter switching diode matrix on the KSB2 board. If your signal level is decreased from the level obtained when the KSB2 is bypassed ( jumper between pins 1 and 3 of both J9 and J10). then you have a problem with the KSB2 board. Make certa

[Elecraft] K2 Audio Level using filters

2012-04-16 Thread Earl Richardet
Hello to the Reflector, I've recently completed building my Elecraft K2 transceiver and I have one problem that I would like to resolve. Up to the point where I installed the SSB kit into the radio, the audio level on each of the filter selections was strong and working fine. After I installe