: [Elecraft] K2 paint wanted
I have found that the Rust-oleum Automotive Primer spray can, number 2089 DARK
GRAY PRIMER, is a very close match for the K2 color. Note that the
2081 LIGHT GRAY version is too light. The 2089 goes on very dark, and is
almost black while wet.
It is readily available at
Another option is simply to buy replacement panels from Elecraft. Not
as cheap as paint but makes a well-used K2 look brand-new. That's what
I did with Tom Hammond's (NØSS) serial number 8.
73,
Kent Trimble, K9ZTV
Jefferson City, Missouri
__
I have found that the Rust-oleum Automotive Primer spray can, number 2089
DARK GRAY PRIMER, is a very close match for the K2 color. Note that the
2081 LIGHT GRAY version is too light. The 2089 goes on very dark, and is
almost black while wet.
It is readily available at Home Depot stores.
73,
He
Many thanks to all who have replied with some good suggestions such as near
matches, mixing grey enamels and using a paint-matching service at a DIY or
automotive store. Also, Elecraft may be able to provide a paint colour
code: Elecraft, hello???
The liquid-in-a-pot was what I really wanted
I'm assuming you can spray the material yourself and don't need a spray
(rattle) can solution. If you do, I used Rust-Oleum Ultracoat 249078 Satin
Granite. It's not an exact match, but not bad.
Here's my K2 setup. The box in the upper right is an EC2 clone I built and
painted with the Satin Gra
One other choice is any paint store or big box hardware store. They can
scan and custom mix the color with a high degree of accuracy. I've used
this approach on several occasions with good results.
I seem to recall that some paint specialty stores can make custom colors
in spray cans.
And I
Good evening,
Ask a car bodybuilder he will do a color scan and will make you a sample
with their color scanner they are capable of a lot of things
73 , Christophe F8ACF-56
Le jeudi 7 décembre 2017 à 15:32:13 UTC+1, Dave Lankshear
a écrit :
Hi everyone. I'm restoring an old Elecraf
Hi everyone. I'm restoring an old Elecraft K2 and need some of the grey
paint for the case, but I see it's no longer offered by Elecraft.
If you'd kindly take a look to see if you still have any and it's still
liquid and no longer wanted, I'd be pleased to purchase it from you and pay
shipping
Hi o all
This morning I ordered the repair paint from Elecraft. I was not aware
of this nice addition to the parts and mod kits page but thanks to Mick,
M1MDG, I found the solution to my problem (I hope I will need it only
for the light scratch on the bottom cover, Hi). I really believe that my
mi
Hi
Touch up paint is available from elecraft see spares
Mick m1mgd K1 #01532K2 #?? still in transit
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
Hello to the group
Just a few minutes ago I finished alignment and test part I for my brand
new K2 with S/N 4726. Everything went right first time with no trouble
at all. When assembling the tilt stand to the bottom cover while I was
doing pressure to set the second oval foot the screw slipped lat
11 matches
Mail list logo