Wylie,
That is a voltage rail that you are checking, and you should measure
somewhere close to 250 or 300 ohms. I assume you do not have the
Control Board plugged in yet - if you do remove it and remeasure.
Actually the resistance check at U11 pin 8 is not a very good check of
the 8A voltage
Wiley,
The resistance between U6 pin 8 and ground was 295 ohms in my K2 built in
2003, before the RF board was assembled with the front panel and Control
board.
Hope that this helps.
73,
Geoff
LX2AO
On July 14, 2012 at 10:25 PM, Wiley Kling wrote:
>I am building a recently purchased K2, se
I am building a recently purchased K2, serial # 7313. In the past few years
I have built 6 or 8 solid state kits, including a K1, without a hitch.
However, I am now having a problem that is really making me feel like a
"newbie".
I am on page 62 of the manual and things have gone swimmingly u
3 matches
Mail list logo
