I'm using a new K3/0 mini and the remoteRig boxes to remote my K3.
I'm getting reports of my PSK looking like I'm over driving it.
I have my laptop soundcard level set down to 10 as recommended by
Brandon. When xmtg I set the ALC level to 4 with 5th flickering or even
just 4. If I go any lower
Dwight,
You have the audio level set correctly if you are getting 4 bars on the
ALC meter with the 5th one flickering at times.
Are you using DATA A mode? If you are using USB mode, you must manually
turn off compression and set the equalizer flat. Using DATA A does that
automatically.
Anoth
Thanks foTalked with Elecraft and they sent me a paper on setting up the
different modes for the K3/0. One thing I was doing wrong was using Data
A when they recommend USB. Seems to be okay now with some more signal
reports.
HNY to all 73 de NS9I Dwight
On 12/29/2015 5:03 PM, Don Wilhelm wrot
Dwight,
I don't have experience with Remote Rig, and Brandon's suggestions usurp
mine. One thing I know is that if you are using USB mode instead of
DATA A, you will have to set compression to zero and set the TX EQ to
flat. Failure to do that will result in distorted data transmissions.
7
Got it Don, yes the paper was written by Brandon.
thanks much and HNY to you.
73 Dwight NS9I
On 12/29/2015 6:56 PM, Don Wilhelm wrote:
Dwight,
I don't have experience with Remote Rig, and Brandon's suggestions
usurp mine. One thing I know is that if you are using USB mode
instead of DATA A
5 matches
Mail list logo