I currently have two HF antennae. One is an NVIS loop for MARS and
the other is a 4 Element Yagi-Uda 5 bander 20m through 10m.
On the KPA500 I have those two antennae connected as follows:
NVIS Loop; connected to antenna port one, which also allows me to
work 3.52 and 3.8MC.
Yagi-Uda: connected
] On Behalf Of rich kennedy
Sent: Sunday, November 04, 2012 11:58 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3/KPA500/KAT500 - Band Decoder for Antenna Switching
Hello, I currently have a K3 & KPA500, and, shortly I hope, a KAT500. I
have 3 antennas that I electronic switch wi
Perhaps the switch is on the tower, so only one feedline is shared
between the antennas...
73,
~iain / N6ML
On Sun, Nov 4, 2012 at 12:52 PM, Phil Hystad wrote:
> Rich,
>
> I am curious as to what you are switching.
>
> If you have 3 antennas and the K3, KPA500, and eventually KAT500,
Rich,
I am curious as to what you are switching.
If you have 3 antennas and the K3, KPA500, and eventually KAT500, isn't that
all you need?
At least that is my plan. I have an Array Solutions SixPak right now that I
use for antenna
switching but since I have three antennas I use for differen
On Sun, Nov 4, 2012 at 11:57 AM, rich kennedy wrote:
> Hello, I currently have a K3 & KPA500, and, shortly I hope, a KAT500. I have
> 3 antennas that I electronic switch with a DXEngineering RR8HP Remote Antenna
> Switch by manually selecting them on the DXEngineering Antenna Control
> Console
Hello, I currently have a K3 & KPA500, and, shortly I hope, a KAT500. I have 3
antennas that I electronic switch with a DXEngineering RR8HP Remote Antenna
Switch by manually selecting them on the DXEngineering Antenna Control Console.
I wish to have some kind of band decoder and electronic swit
6 matches
Mail list logo