not sure if this is the 'fix' or not
but check out the Config menu
under CW Wght
it says:
Tap 4 to select VOX NOR (default) or AUTO OFF. The AUTO OFF setting
turns CW VOX off on power-up, avoiding accidental keying by attached PCs,
etc.
hope it helps
--
View this message in context:
http://el
If you are using a serial cable for PTT (CONFIG:PTT-KEY), Windows
will pulse the DTR and RTS lines during the boot process.
73,
... Joe, W4TV
On 11/16/2012 5:54 AM, Joel Black wrote:
> To either of you, what is your default sound card?
>
> I ran into a similar problem while experimenting w
Disregard my previous email. Your situation is different than mine. In
my case, the SignaLink was keying, not the K3. In normal operation, I
let software key my K3 not the SLUSB.
73,
Joel - W4JBB
On 11/15/2012 6:09 AM, Mike Harris wrote:
> My Dell Win7/64 box keys the K3 seven times in a bur
To either of you, what is your default sound card?
I ran into a similar problem while experimenting with Win8 - upon
boot-up, the radio would key several times. The SignaLink microphone
was the default mic input. I changed it to something else and that
problem disappeared.
73,
Joel - W4JBB
W3fpl & K2VCO tapped out:
> If one doesn't do CW via DTR/RTS you can turn off the CONFIG PTT-KEY
> (set it to OFF-OFF). Then the boot process won't affect the K3. I
> finally got so annoyed by this that I got a WinKey USB. The
> computer-generated CW is cleaner, too.
> Do you have the K3 set t
---
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike Harris
> Sent: Thursday, November 15, 2012 04:09
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3: How to setup K3 with Signalink-USB ?
>
> My Dell Win7/64
Bob,
Do you have the K3 set to activate either keying or PTT from the DTR or
RTS lines (CONFIG: PTT-KEY menu set to something other than OFF-OFF)?
If so, the K3 will go into transmit (not TX TEST) when the computer
boots up and tests the RS-232 signal lines.
What the manual says is that *if*
n...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike Harris
Sent: Thursday, November 15, 2012 04:09
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3: How to setup K3 with Signalink-USB ?
My Dell Win7/64 box keys the K3 seven times in a burst on boot up. If the
K3 is already
My Dell Win7/64 box keys the K3 seven times in a burst on boot up. If
the K3 is already on I just enable TX test until boot up has completed.
Regards,
Mike VP8NO
On 15/11/2012 08:53, KD7YZ Bob wrote:
> Howdy K3' people:
>
> I have another 'Newbie User' Question.
>
> This one regards the fact t
Howdy K3' people:
I have another 'Newbie User' Question.
This one regards the fact that I notice when the K3 is already on AND I
then turn-on the Windows-7 machine, at some point the rig switches to
Xmit. Per the manual, it goes into "Test" mode, and thus, no RF Power.
No other "Radio" software
10 matches
Mail list logo
